Sartorius CP Series Operations Instructions download pdf (Page 17)

Preparation

A circle displayed in the upper right-hand

corner indicates that the balance/scale has

been disconnected from power (the power

cable was unplugged or due to power failure).

● Turn on the balance/scale: Press e

> All symbols on the display light up briefly.

> The balance/scale performs a display test.

● To change configurations: see the chapter

entitled “Configuration"

● To load factory-set default configurations:

see “Configuration" (menu code 9 - -1)

$ To tare the balance/scale: Press t

When the balance/scale is switched on,

the b is displayed until you press a key.

If the b symbol is displayed during

operation, this indicates that the processor

is performing a function and cannot receive

further commands at the moment.

Additional Functions

● Turning off the balance/scale: Press e

A zero in the lower left-hand corner

indicates that the balance/scale has been

switched off and is in stand-by mode.

Filter Weighing with Model CP2P-F

The CP2P-F filter microbalance comes with

a filter pan that has a utilizable diameter of

125 mm as standard equipment. Place the

filter on the pan and close the lid.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 89 90

No comments

Sartorius CP Series Operations Instructions Page 17