Sartorius Quintix User Manual Page 83
- Page / 107
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
83
Status Messages
User Manual for Secura, Quintix, Practum
Status Messages
Messages appear on the display when certain events occur:
– Info messages are displayed for two seconds. The program then returns
automatically to its original point.
– Error messages are displayed until they are acknowledged with a key.
Key Fadeout
To avoid operating only the available functions/keys according to the weighing
situation are shown.
The following buttons are only available in certain situations:
A
Only when there is a weight value within the zero setting range.
D
Only when there is a weight value larger than zero, i.e., positive.
a
Only when a peripheral device is connected and “Print" is not locked.
z
Only when calibration and adjustment functions are available and not
locked.
[
Only when the balance has an electronic level indicator.
v
Only when a weight value larger than zero is the value saved in the
memory, if the value can be saved (e.g., value larger than SQmin).
w
Only when an application can be started (i.e., only when larger than
zero and “Start" is permitted).
E-Check
Some models are equipped with an internal self-test that is regularly
carried out. This ensures that all metrological thresholds are
maintained.
Error Messages in Applications
“Value is too small!" when an entered value is too low for the parameter.
“Value is too large!" when an entered value is too high for the parameter.
“Incorrect licence code" when password-protection is enabled and the code
was entered incorrectly.
“Not able to increase
identifier."
when the sample ID could not be assigned a number
in ascending order automatically (as described in the
“Individual Identifiers" chapter).
“Not able to decrease
identifier."
when the sample ID could not be assigned a number
in descending order automatically (as described in the
“Individual Identifiers" chapter).
visit www.scaleman.com for lab balances at great prices
visit www.balances.com for lab balances at great prices
- , Quintix 1
- , Practum 1
- Contents 2
- User Information 3
- Safety Information 4
- Intended Use 5
- General View of the Equipment 6
- Installing the Balance 8
- Choosing a Location 10
- Getting Started 11
- FCC Rules 12
- Leveling 13
- (Quintix 14
- Below-balance Weighing 15
- Anti-theft Locking Device 16
- Moving the Balance 17
- Using the Balance 18
- Setting the Language 19
- Operating Concept 20
- The Menu 21
- Enter figures on the keypad 21
- Weighing (see page 34) 22
- Mixing (Secura 22
- System Settings (Setup Menu) 24
- ComponentsStatistics 24
- MixingWeighing 24
- Language 25
- Français 25
- Device Information 26
- Calibration/Adjustment 26
- Weighing 26
- D is selected 27
- Printout 28
- Identifier 29
- USB Port 30
- Display Brightness 31
- Acoustic signal 31
- More settings 32
- Set password 32
- Reset settings 32
- USB mass storage 32
- Enable service mode 32
- Lock Menu (Quintix 33
- A to zero the balance 34
- D to tare the balance 34
- Mass Unit Conversion 35
- Unit Factor Display 36
- Switching SQmin On/Off 37
- Max 2100 g d 38
- D to tare 39
- Component 40
- Printing Results 41
- Print component 45
- Max 220 g d 48
- 0.0001 g 48
- Density of liquid 48
- Weight in air 49
- Weight in medium 50
- Reference Accuracy 52
- Percentage 53
- Reference weight 53
- Factor Accuracy 55
- 16.03335 56
- Unstable Condition 57
- Unstable condition 57
- Measurements 58
- Checkweighing 59
- Counting 64
- Piece weight 65
- Calibration and Adjustment 66
- Calibrate balance 67
- CAL-Extern 67
- CAL-Intern 67
- ISO/GLP-compliant Printout 70
- USB Port 72
- Storage connect to PC? 75
- Interface Specification 78
- Data Input 81
- Status Messages 83
- Leveling Error Messages 84
- “USB Devices” Error Message 84
- Transporting the Balance 85
- Care and Maintenance 88
- Cleaning the Draft Shield 89
- 4) Lift the frame cover 90
- Assembling the Draft Shield 92
- Disposal 93
- Specifications 94
- Accessories (Options) 99
- Balance Dimensions 100
- and Practum 101
- EC Declaration of Conformity 104
- EC Type-approval Certificate 105
- Plates and Markings 106
Related products and manuals for Kitchen scales Sartorius Quintix
Kitchen scales Sartorius CAW3S User Manual
(154 pages)
(154 pages)
Kitchen scales Sartorius FC User Manual
(6 pages)
(6 pages)
Kitchen scales Sartorius SIWSBBS User Manual
(12 pages)
(12 pages)
Kitchen scales Sartorius PMA600H User Manual
(24 pages)
(24 pages)
(48 pages)
Kitchen scales Sartorius FBG User Manual
(6 pages)
(6 pages)
© 2020, manymanuals.com. All rights reserved. | 1.694 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals